This website uses cookies

The website of the Fundació Politècnica de Catalunya uses its own and third-party cookies to improve the browsing experience and for statistical purposes. For more information about cookies you can consult the cookie policy.

Manage cookies
Allow all cookies
Campus
MY_TECH_SPACE


Go
Campus in maintenance
User and / or password incorrect
You have no active environment
Your access has been restricted. Consultation with the department of administration
Due to technical problems, the virtual campus is inaccessible. We are working to solve it. Sorry for the inconvenience.
You are not authorized to make this call. You can consult webmaster.fpc@fpc.upc.edu
You have exceeded the maximum number of attempts. Your user is temporarily blocked. Check back in a little while.
You must enter your campus username, not an email
You have to perform the verification to verify that you are not a robot.
Home   >  Master's & postgraduate courses  >  Education  >  Continuing education master's degree in Industrial and Services Project Management
We advise you! Request information or admission

Presentation

Edition
22th Edition
Credits
60 ECTS (385 teaching hours)
Delivery
Face-to-face
Language of instruction
Spanish
Fee
€9,300
Special conditions on payment of enrolment fee and 0,7% campaign
Registration open until the beginning of the course or until end of vacancies.
Start date
Start date: October of 2025
End date: November of 2026
Timetable
Friday: 4:00 pm to 9:00 pm
Saturday: 9:00 am to 2:00 pm
Taught at
Tech Talent Center
C/ de Badajoz, 73-77
Barcelona
Why this continuing education master's degree?
Design and management of projects in terms of efficient quality, response time and cost is challenge for any business. In this master's course in Project Management we teach students how to direct and manage projects from a general viewpoint, offering an understanding of the most advanced trends used to successfully complete industrial, service, or any type of general project.

This course can be divided into two large blocks, the first of which is an essentially technical section where project management systems using the most advanced techniques are explained and the concept of lean management is introduced and a financial vision is incorporated in terms of developing budgets and predicting possible investments. The other block is dedicated to the more humanistic side of projects. This block covers strengthening teams that carry out the projects and give the project leaders the abilities and capacity to manage personnel. With this in mind students will work on aspects like emotional intelligence, negotiation techniques and business communication. As well, they will study external planning processes and project development, outsourcing and the externalisation of services.

The professors for this master's course are made up of industrial sector professionals with a wide array of experience in the business world. As we expect the highest quality and a very high level of excellence in each subject taught in this course the list of professors is quite large. This is why both a coordinator position for each area and a general coordinator position have been created to ensure the uniformity of all the courses. These professors are also entrusted with the task of working as tutors for the master's course final project that students will elaborate.

To make following this course easier, upon the completion of enrolment students will receive a iPad to which they can download the notes and all of the documentation from the Master's programme.
Aims
  • To define the design, development and execution of highly efficient and competitive industrial or service projects.
  • To develop project management, planning and control techniques.
  • To formulate projects tailored to the client's requirements and specifications, with minimum costs and reduced lead times.
  • To provide the abilities needed to manage teams.
Who is it for?
  • Managers and collaborators in industrial or service project development.
  • Professionals who are in positions of responsibility in terms of planning and project management of any kind.

Training Content

List of subjects
5 ECTS 45h
Project Management. Proyectos Industriales y de Servicios. Metodología PMBOK
  • Project structure.
  • The organisation and processes as project support elements.
  • New development and improvement projects.
  • Simultaneous engineering: optimising project timing and costs.
4 ECTS 30h
Desarrollo de Productos
4 ECTS 35h
Metodología PMBOK
3 ECTS 25h
Proyectos con Calidad y Mínimo Coste y Tiempo. Ingeniería Concurrente.. Six Sigma
  • Proper project planning and the means to do it: Quality Function Deployment.
  • Error identification and correction when developing project objectives: using FMEA Methodology and Six Sigma to reach desired excellence.
  • Project teams.
  • Development of DMAIC projects and methodology.
10 ECTS 80h
Recursos Humanos en los Proyectos. Equipos de Proyecto. Habilidades Directivas. Coaching
  • Strategic corporate management.
  • Proactive leadership and management of personnel.
6 ECTS 45h
Planificación de Proyectos. Métodos Basados en el Camino Crítico y la Cadena Crítica
  • Project planning.
  • Policy deployment: Hoshin Kanri.
  • Methods for scheduling projects based on the critical path: Gantt and PERT.
  • Project planning and scheduling software.
  • Microsoft Project.
  • Scheduling projects for improved results: the critical chain.
  • CC-Pulse software.
  • The organisation and project planning and development personnel.
6 ECTS 45h
Agile. Scrum. Kanban. Lean Product and Process Development (LPPD)
3 ECTS 25h
Externalización de Proyectos. Outsourcing. Proyectos entre Distintas Culturas
  • Lean Management in project management.
  • Flow control and Value Stream Map.
  • PMBOK methodology in project development.
  • Preparation test for obtaining the PMP and PMI certification.
  • PRINCE Methodology (Projects in Controlled Environments).
3 ECTS 25h
Gestión Económica de los Proyectos. Costes. Inversiones. Financiación
  • Outsourcing and contracting processes for a project.
  • Response management.
  • Customisation.
  • Managing time, resources, inventory and other aspects in order to assure results.
2 ECTS 15h
Taller de Preparación para la Certificación de Project Management Profesional® (PMP)
14 ECTS 15h
Proyecto Final de Máster
  • Selecting a subject for the final project.
  • Information collection and analysis.
  • Creating the project, including every stage of its development.
  • Creating the project report.
  • Preparing a public presentation of the project.
  • Project presentation.
The UPC School reserves the right to modify the contents of the programme, which may vary in order to better accommodate the course objectives.
Degree
Continuing education master's degree in Industrial and Services Project Management, issued by the Universitat Politècnica de Catalunya. Issued by virtue of the provisions of art. 7.1 of Organic Law 2/2023 of 22 March, concerning the University System, and art. 36 of Royal Decree 822/2021 of 28 September, which establishes the organisation of university education and the procedure for ensuring its quality. A prior official university qualification is necessary to obtain it. Otherwise, the student will receive a certificate of completion of the programme issued by the Fundació Politècnica de Catalunya. Lifelong learning studies at the Universitat Politècnica de Catalunya are approved by the University's Governing Council on an annual basis. (See details appearing on the certificate).

Learning methodology

The teaching methodology of the programme facilitates the student's learning and the achievement of the necessary competences.



Learning tools
Participatory lectures
A presentation of the conceptual foundations of the content to be taught, promoting interaction with the students to guide them in their learning of the different contents and the development of the established competences.
Practical classroom sessions
Knowledge is applied to a real or hypothetical environment, where specific aspects are identified and worked on to facilitate understanding, with the support from teaching staff.
Solving exercises
Solutions are worked on by practising routines, applying formulas and algorithms, and procedures are followed for transforming the available information and interpreting the results.
Case studies
Real or hypothetical situations are presented in which the students, in a completely participatory and practical way, examine the situation, consider the various hypotheses and share their own conclusions.
Success stories
Outstanding business knowledge and experiences with high added value acquired during an outstanding professional career are presented and shared.
Flipped classroom
The contents are prepared prior to the face-to-face lessons. Practical sessions take place in the classroom, which enable understanding and application of concepts to real cases and the expansion of knowledge with more technical and specialised details.
Tutorship
Students are given technical support in the preparation of the final project, according to their specialisation and the subject matter of the project.
Workshops
Students are supported when undertaking group work, including theoretical sessions which provide the tools and knowledge needed to achieve a result. Ideas and results are exchanged between all the participating groups.
Assessment criteria
Attendance
At least 80% attendance of teaching hours is required.
Work out projects
Studies on a specific topic, by individuals or groups, in which the quality and depth of the work is assessed, among other factors.
Completion and presentation of the final project
Individual or group projects in which the contents taught in the programme are applied. The project can be based on real cases and include the identification of a problem, the design of the solution, its implementation or a business plan. The project will be presented and defended in public.
Work placements & employment service
Students can access job offers in their field of specialisation on the My_Tech_Space virtual campus. Applications made from this site will be treated confidentially. Hundreds of offers of the UPC School of Professional & Executive Development employment service appear annually. The offers range from formal contracts to work placement agreements.
Virtual campus
The students on this continuing education master's degree will have access to the My_ Tech_Space virtual campus - an effective platform for work and communication between the course's students, lecturers, directors and coordinators. My_Tech_Space provides the documentation for each training session before it starts, and enables students to work as a team, consult lecturers, check notes, etc.

Teaching team

Academic management
  • Cuatrecasas Arbós, Lluís
    info
    View profile in Linkedin
    Doctor Industrial Engineer and UPC Professor. President of the Lean Management Institute of Spain. Author of various books. Industrial business consultant.
  • Cuatrecasas Castellsagués, Oriol
    info
    View profile in futur.upc / View profile in Linkedin
    BEng in Industrial Engineering. Specialist Consultant in Lean Manufacturing. Member of the Lean Management Institute of Spain.
  • Consolación Segura, Carolina
    info
    View profile in futur.upc
    PhD and Tenured Lecturer of the Business Organisation Department of the UPC. Degree in Economics and Business from the UB.
Teaching staff
  • Asensio García, José
    info

    Technical-Mechanical Engineer UPC, with 30 years working for Nissan Motor Ibérica S.A. in various management positions in Logistics, Production and Nissan Production Way. Has participated in various synchronised production seminars and worked for JIT Kaizen (in Japan and the US). His speciality in the frame of the Engiplant Master's course is the resolution of problems in the Kaizen area. Currently Lean and Supply Chain Project Manager at Itemsa.
  • Consolación Segura, Carolina
    info
    View profile in futur.upc
    PhD and Tenured Lecturer of the Business Organisation Department of the UPC. Degree in Economics and Business from the UB.
  • Cuatrecasas Castellsagués, Oriol
    info
    View profile in futur.upc / View profile in Linkedin
    BEng in Industrial Engineering. Specialist Consultant in Lean Manufacturing. Member of the Lean Management Institute of Spain.
  • Deulofeu Aymar, Joaquim
    info
    View profile in futur.upc / View profile in Linkedin

    Holds a degree and PhD in Economic and Business Sciences from the University of Barcelona (UB). He is an EFQM international evaluator-advisor, and the founding partner and CEO of Qualitat, Serveis Empresarials, S.L., the company where he has been working as a consultant for more than twenty-five years. Associate professor at the Business Organization Department of the Universitat Politècnica de Catalunya (UPC), and professor of the UPC School.

  • Esteve Oró, Felip
    info
    View profile in Linkedin
    Consultant and expert in organisational development and management.
  • Genescà Palau, Enric
    info

    BEng in Industrial Engineering. Consultant-adviser in project management, with extensive experience in the automobile sector.
  • Herranz Sotoca, Antonio
    info
    View profile in Linkedin
    Partner at Ydros, a consultancy specialised in Strategic Management and Organisational Remuneration-based Development. Graduated in Social Psychology from the UB, with a Master's degree in Organisational and Process Consulting from the Fundació les Heures - UB. Associate Professor at the Fundació Politécnica de Catalunya and other Business Schools, with ample experience in both in the public and private sectors. Specialised in strategic HR management, remuneration systems and Executive Coaching.
  • Moya Valladares, Aránzazu
    info

    Industrial Engineer. Plant manager at Magna-Donelli.
  • Pons Peregort, Olga
    info

    Industrial Psychologist. Lecturer for the Business Organisation Department of the UPC. HR Consultant.
  • Romero Cuadros, Maria Antònia
    info

    Psychologists, Master's in Coaching. Coach and consultant at Argos Coaching, S.L. Contributor to the Business Organisation Department of the UPC.
  • Rossi, Monica
    info

    Associate Professor at Politecnico di Milano, where she got her PhD in Industrial Engineering in 2014. Her research topics are Product Life Cycle Management, Lean Startup, Human Centric Manufacturing. She has held visiting researcher positions at MIT, Tokyo Metropolitan University, Sorbonne UTC, Rutgers. She teaches Product Lifecycle Management and Industrial Technologies at MSc, Lean Product Development at executive master. She publishes in international journals such as Computer in Industry, IEEE Transactions on Engineering Management and Int Journal of Project Management.
  • Santiago López, Ana
    info
    View profile in Linkedin
    Psychologist with a Master's in Coaching. Coaching consultant at Argos Coaching, S.L., Head of Policies and Programmes in the Human Resources Department of Intermón Oxfam.
  • Sardà Ferrer, Joan
    info

    Economist. Lecturer in the Business Organisation Department of the UPC. Member of the Committee Advisor of the Catalan Institute of Oncology . Member of the Committee of Rule and Ethic Professional of the School of Economists of Catalonia.
  • Torrell Martínez, Francesca
    info
    View profile in futur.upc
    Higher Telecommunications Engineer from the Universitat Politècnica de Catalunya (UPC). Master in Organization and Engineering of Production and Management of Industrial Plants (Engiplant) from the UPC School. Maintenance Management Consultant. Member of the Lean Management Institute of Spain.

Career opportunities

  • Project Manager.
  • Manager of development of new products or services.
  • Manager of process improvement teams.
  • Chief for project development.
  • Management of project human teams.
  • General or executive Manager.
  • Project Manager Consulting (PMI).

Testimonials

Testimonials

I believe that administration is the key to personal and professional success. The Masters seems perfect to me for three reasons which have to do with my initial expectations: the programme has a dual focus on industry and services, the teaching staff have a lot of experience in those fields, and it recognises the need for offering management tools which allow you to comprehensively manage the technical aspect and the human capital which make up a project. Having completed the course I can say that, on the one hand, technical tools such as risk management are helping me to improve processes in the company and, on the other hand, tools such as emotional communication, proactive people leadership and conflict management have substantially improved my cultural and working relations with my colleagues in Asia, America and Europe. In short, the Masters offers comprehensive training which promotes improvements on a personal and professional level.

Manuel Mata CAM Project Engineering, Grohmann Engineering GmbH

Request information or admission

Information and guidance:
Isabel de la Fuente Larriba
(34) 93 115 57 51
Request received!
Your request has been received successfully.

During the Christmas holiday period, UPC School will be operational on December 24 and 27, as well as on January 2 and 3.

If you have any inquiries during this period, you can contact us by phone at 93.112.08.08, from 9 am to 2 pm, or you can reach us by email at info.upcschool@talent.upc.edu.

We will respond to you as soon as possible.

We take this opportunity to thank you for your interest and wish you Happy Holidays.
Error
Due to an error in the connection to the database, your submission has not been processed. Please try again later, phone us on (34) 93 112 08 08, or send us an email at: webmaster.fpc@fpc.upc.edu
You have exceeded the maximum size of the file
Please check your payment details. The platform has returned an error.
You can make the payment again without re-entering the data.

Name:

Course: Industrial and Services Project Management

Fee: €9,300

Submit and make the payment
  • If you have any doubts about the continuing education master's degree.
  • If you want to start the registration procedure.
How to start admission
To start the enrolment process for this programme you must complete and send the form that you will find at the bottom of these lines.

Next you will receive a welcome email detailing the three steps necessary to formalize the enrolment procedure:

1. Complete and confirm your personal details.

2. Validate your curriculum vitae and attach any additional required documentation, whenever this is necessary for admission.

In addition to your CV, the UPC School will also require you to submit the following documents for preregistration on this Continuing education master's degree:
    • A letter of motivation

3. Pay €110 in concept of the registration fee for the programme. This fee will be discounted from the total enrolment fee and will only be returned when a student isn't admitted on a programme.

Once the fee has been paid and we have all your documentation, we will assess your candidacy and, if you are admitted on the course, we will send you a letter of acceptance. This document will provide you with all the necessary information to formalize the enrolment process for the programme.





  date protection policy

* Mandatory fields

Basic information or first layer on data protection

Controller

Fundació Politècnica de Catalunya (FPC). + INFORMATION

Purpose of processing

Respond to requests for information from the data subjects on training activities managed or carried out by the FPC. + INFORMATION

Establishment or maintenance of the academic relationship with the data subject. + INFORMATION

Send information on the activities of the FPC. + INFORMATION

Legitimation

Data subject's consent. + INFORMATION

Legitimate interest in the development of the academic relationship. + INFORMATION

Addressees

No assignments or communications.

Rights

Access, rectification, erasure, restriction, object and data portability. + INFORMATION

Data protection officer contact details

info.dpo@fpc.upc.edu

Additional information

Privacy policy of our website. + INFORMATION

Storage limitation

Privacy policy of our website. + INFORMATION

Payment services

In the event that the data subject enters into a formal relationship with the FPC, the data subject authorises and consents to the charge, thereby expressly waiving the right to a refund of the charge.

ACADEMIC AND ECONOMIC REGULATIONS

The Fundació Politècnica de Catalunya reserves the right to modify content, price, location, timetable and dates prior to the start of the course. Registration on the course will not be confirmed until payment has been made.

Registration rights. The interested party must make payment of the specified registration fee for the course. This fee will be deducted from the full course fee and will only be reimbursed if the applicant is not admitted.

Cancellation or deferment.The Fundació Politècnica de Catalunya reserves the right to cancel or defer a course if the minimum number of students is not met. In case of cancellation or non-admittance, the Fundació Politècnica de Catalunya will return all amounts paid in full, without any additional compensation. In case of deferment, applicants may request reimbursement of fees paid.

Cancellation of registration.
In the event of withdrawal or cancellation of the registration, the student must notify the UPC School in writing beforehand.
  • If this request for cancellation is made 45 days before the start of the programme, the UPC School will retain only 30% of the total registration fee and refund the difference paid.
  • In the event that the application request is made within 45 calendar days and the beginning of the programme, the UPC School will retain 60% of the registration fee.
  • No applications for refunds may be made after the programme has started.
Under exceptional circumstances, refunds of the registration fee will be made if the student's cancellation is due to one of the following circumstances:
  • Denial of a visa, subject to submission of supporting documentation. In this case, the UPC School will refund the registration fee less 300 Euros for administrative expenses.
  • Serious illness or accident accredited by an official medical certificate, stating the start date of the illness and the anticipated convalescence period. In this situation the UPC School's decision will be as follows:
    • If the notification takes place up to one month after the start of the programme, it will refund the amount actually paid, less 300 Euros as administrative expenses.
    • No refunds will be made after a month after the start of the programme. It will be only be possible to use the amount paid as a deposit for the registration fee of the next programme. This procedure entails no administrative fee for the student. The price difference between the new registration fee and the amount previously paid will be payable by the student under all circumstances.

Changes in registration. Any changes in registration, previously authorised by the Fundació Politècnica de Catalunya, will incur a 300 € administration fee.

Discounts.
  • Discounts are non-accumulable. The greater discount of those requested will be applied.
  • Discounts can only be applied under prior application and approval.
  • Once registration has been confirmed, no discount will be applied.
  • Students are responsible for placing applications for any discounts.

Qualification. In order to obtain the Qualification/Diploma issued by the Polytechnic University of Catalonia, the student must be in possession of a recognised university qualification or internal university qualification equivalent to a degree or diploma. If this is not the case, the student will receive a certificate of completion for the course, issued by the Fundació Politècnica de Catalunya. Students with outstanding payments due to the Fundació Politècnica de Catalunya or who has not approved all the credits necessary to overcome the program before the date of completion of this program will not be eligible to receive any qualification, diploma or certificate.

Barcelona, October 31, 2017


Send